Board faults key device in BP oil spill
US Chemical Safety Board report blames bad management, operations for faulty wiring, dead battery, bent pipe in blowout preventer By SETH BORENSTEIN Associated Press Science Writer
A federal board investigation into the 2010 BP oil spill concludes that a last-ditch safety device on the underwater well had multiple failures, wasn’t tested properly and still poses a risk for many rigs drilling today.
The report issued June 5 by the U.S. Chemical Safety Board (available on the b....
[additional news subjects in this story]
Old vs. new Failure in testing
You must be logged in to view this story. Please either log in or subscribe.
Click here to subscribe to Petroleum News for as low as $89 per year.
Subscribers log in here to read the entire newspaper (1998 to 10/31/2019)
Print this story | Email it to an associate.
Petroleum News - Phone: 1-907 522-9469 - Fax: 1-907 522-9583 [email protected] --- https://www.petroleumnews.com --- S U B S C R I B E
Copyright Petroleum Newspapers of Alaska, LLC (Petroleum News)(PNA)©1999-2019 All rights reserved. The content of this article and web site may not be copied, replaced, distributed, published, displayed or transferred in any form or by any means except with the prior written permission of Petroleum Newspapers of Alaska, LLC (Petroleum News)(PNA). Copyright infringement is a violation of federal law subject to criminal and civil penalties.
|